My PERSONAL Holy-grail humbucker set! Ever so slightly over-wound and employing AlNiCo V magnets, this set remains true to the vintage PAF tone, but has just a touch more hair and splits into single coil in a most extraordinary manner! Proprietary unbalanced coil winds lead to true PAF Nirvana … and exceptional single-coil abilities as well. Available uncovered or covered, the set is wound and calibrated specifically to excel in the bridge & neck positions respectively. 4-wire with separate ground for unlimited possibilities: Humbucker, Single Coil, parallel coils, series coils, it's all there ... and all sounds impeccable.

This is the set for you if you need both great PAF humbucker tone and remarkable single-coil tone.

​

Custom specs include:

• Precise calibration for optimum performance in bridge and Neck positions
• Vintage single-build 42ga copper magnet wire, wound to slightly above 1960 specs.
• Vintage correct 2.5’’ x 0.5’’ x 0.13’’ sand cast AlNiCo V bar magnets.
• Vintage pickup height tension conical springs
• Vintage Nickel Pickup height adjustment screws
• Vintage Braided Shielded Push-Back Cloth wireleads
• Available without covers or with sonically superior Nickel-Silver covers.
• Light historic wax potting, for true PAF tone without microphonics.
• 4-wire with separate ground for unlimited possibilities, Humbucker, Single Coil, parallel coils, series coils, it's all there.

​

Average Resistance & Induction at 70-degrees F:
• Bridge: 8.8 K/6.2 Henrys
• Neck: 8.0 K/5.2 Henrys

​

(IMPORTANT: Specs change with temperature and many other conditions/variables, especially RESISTANCE.
NEVER use resistance as a firm indicator of a pickups output, tone, or anything else!)
 

Note: Please allow up to 72-hours for custom pickup production.